IPhone 7 and 7 Plus, which recently released, only phones waterproof from Apple, many of the tests performed on previous generations such as the iPhone 6 and iPhone 6 S feeds were not showing it has a somewhat water-acceptable resistance, but recent phones, the first of Apple, which has evaluated in accordance with the IP standard.
The telephone iPhone 7 and 7 Plus they have IP-67 in assessing water and dust resistant which means they can withstand a depth of one meter up to 30 minutes without being affected, as well as high resistance to dust from the outside and the inside definitely.
The process may seem complicated or seem as if the companies had to re-manufacture everything to be water-resistant, but the reality is the opposite, or at least the techniques and ideas used in the iPhone 7 simple, but it protects the device from water, according to the results of the tests.
To achieve this equation - The removal of internal components and protection of water - the Apple beginning paste the screen with the device structure using adhesive tape is very strong, and intensified this use so as to ensure the existence of more than one layer to fully protect and prevent water intrusion into the internal components, as we see at the end of the video found in the above.
The company has also developed a thick insulator on the body to isolate the microphone and prevent the entry of water to it, with the use of a ring of rubber around the piece that put slide the SIM Tray, and therefore when you close the device and set piece inside isolate this episode device and prevent water leakage him.
It reiterated Apple's use of rubber in more than one place especially around the buttons that may allow the passage of water when you press them, so each button and the bottom of the loop there to prevent water leakage into the interior as well.
The use of this concept would protect the devices from the water but it certainly makes maintenance more difficult because manually install or replace rubber rings or adhesive tape is installed incorrectly may damage the device completely when exposed to water. The slide piece they put the most sensitive from the point of view of experts, because the place out and entered too much can affect the rubber ring.
An important paradox that must be taken into account is that the water resistant feature found in these devices or smart devices in general cases of sudden - at most - to fall into the water or use the device in the rain; iPhone screen 7, for example, do not work under water, where they found it difficult to identify the contact the skin of the screen, and thus some may mention that the company has failed or that the feature is not useful, but it essentially created a water emergency resist only a few companies focused on making possible to use the phone under water.
For those interested in learning more details about the internal components of the new Apple devices, specifically iPhone 7 Plus, I leave you with this section of the famous site iFixit, who dismantled the entire device to review the internal components.
0 comments:
Post a Comment